M45 - Viventis LS1 light sheet

System description

M45 is the microscope of choice for delicate living samples. It is suitable for long-term (several days) imaging of organoids, embryos and spores.
A sheet-shaped light beam is used for exciting a single plane of the sample. The fluorescent light from the excited plane is imaged by perpendicular, camera based detection. This results in optical sectioning with low-dosage excitation and next to no phototoxic stress for living samples. Only in-focus volumes that are actually imaged, are illuminated.

The LS1 is designed with inverted microscope geometry. The microscope allows dual-side illumination with a light sheet generated by scanning a gaussian beam. Three switchable light sheets with thicknesses of approximately 1 μm, 2 μm and 3 μm are available. The imaging compartment can host a dedicated sample carrier for multiple samples.

Illumination

Laser 488 nm
Laser 515 nm
Laser 561 nm
Laser 638 nm
Transmitted light

Illumination filters

OD0 (100%)
OD1 (10%)
OD2 (1%)
OD3 (0.1 %)
OD4 (0.01%)

Emission filters

GFP BP 515/50

GFP/mCherry DBP

YFP BP 550/49

TBP 488/561/640

mCherry (ET630/75)

Tomato (BP 575/64)

ViventisLS1_Tanaka on FPbase

Camera

Orca Fusion CMOS, Pixel size: 6.5 um (2304 x 2304, 5.3 Megapixels)

Objectives

Illumination optics: Nikon 10X W 0.3 NA

Detection optics: Nikon Apo 25X 1.1 NA (optional mechanical magnifications of 18.75 and 37.5)

Additional devices

Controlled temperature and CO2

Tools for chamber preparation and customization